HI PRO Programmer Compatible with all digital HA

Description

HI-PRO
USB Technical
Specification:
1, PC Interface
The serial USB (Universal Serial Bus) port is used for communication between a PC and the HI-PRO USB unit.
Communication:
SB 2.0 full Speed ( USB 1.1 compatible)
USB Connector Type
“
Type B
”
connector (oil the HI-PRO USB unit)
2
, Power
Supply
:
The HI-PRO USB unit is powered from the PC USB port.
Rated Voltage:
4.50v-5.25v
Maximum Current Consumption( active)
< 500 mA(2.5 W)
Power Consumption during USB Suspend
< 500 uA (2.5 mW)
3
,
Output ratings
The following output ratings are valid for Left and Right hearing instrument connectors.
Fixed Battery supply (pin 1), common for Left and Right side
1.35V, 10/50mA(current rating is controlled by fitting software)
Programmable battery supply (pin 5), common for Left and Right side
-3.50V to +3.50V 30 mA(voltage is controlled by fitting software)
4,
Operating environment
:
T
emperature
5°C-40°C
Humidity
30
to
90%
Warm-up time
<20 seconds
Air pressure
600 hPa to 1060 hPa
Operation at temeratures below -20°C or above +60°C may cause permanent damage.
5, Dimension and Weight
Size (
L*W*H
)
13
7
*114*3
7
mm
Net
Weight
230g
6, Patient Safety
The HI-PRO USB unit complies with the following standards:
●
EN 60601-1, Type BF
●
UL60601 and CAN/CSA-C22.2 NO 601.1-90
To comply with the above standards, the programming cable and the connector to the hearing instrument must meet the following requirements:
●
No conductive parts may be accessible when the programming cable is connected too HI-PRO USB unit.
●
The programming cable and the connector must provide double isolation and be able to withstand a dielectric strength test potential of 500V.
7,  Standards
Safety:
EN 60601-1, Type BF
Electromagnetic compatibility:
EN 60601-1-2
Systems
EN 60601-1-1
Hearing Instrument Interface
EN 60118-14
Notes on EMC
( Electromagnetic Compatibility)
●
The HI-PRO USB is part of a medical electrical system and is thus subject to special safety precautions. For this reason, the installation and operating instructions provided in this document should be followed closely.
●
Portable and mobile high-frequency communication devices, such as mobile phones, may interfere with the functioning of the HI-PRO USB.
Shipping Note:
Please leave your
physical address and telephone number
(only for shipping purposes) when you pay, so that we can ship your package safety and smoothly by courier.
No P.O.Box address!